ALPOC Message Board

Phoenix · Posted: Thu Oct 23, 2008 11:32 pm Post subject: 626 sway bar

Hmmm, just found out that the 98+ 626 sway bars, which are 16mm vs. our 12mm, fit on our cars.

Learn something new everyday.

FelipeT · Posted: Fri Oct 24, 2008 5:46 am Post subject:

Yup, I've been wanting to get one for myself. I'll do it one of these days.
_________________
--Felipe I Torrejon
Visit My eBay Store!

BarryG · Posted: Fri Oct 24, 2008 7:25 am Post subject:

1st read about it on PT. Keep forgetting to go get one.

Somewhere on this board I put a link to a parts interchange list compiled on PT. Well, more like an anecdotal thing. For instance; 99 (?) Protege rear calipers bolt in place of PGT calipers followed be tens of "has anyone done this and do you have pictures" responses.

Okay, I thnk this is it: http://forums.probetalk.com/showthread.php?t=1701141029
B
_________________
Butter!
Parkay!

Phoenix · Posted: Fri Oct 24, 2008 8:57 am Post subject:

When I put my 19mm AWR sway bar on my PGT I saw a huge difference. It was fun carving corners.

Looks like I'll be doing this mod as there are a couple of 626's at the pull-a-part. Might do the rear brake mod too.

BarryG · Posted: Fri Oct 24, 2008 10:23 am Post subject:

Thats one reason I kept the axle from the black GT. I plan, eventually, on putting it in the SE for Amber and adding those Protege brakes to both cars.

B
_________________
Butter!
Parkay!

PSE driver · Posted: Fri Oct 24, 2008 12:08 pm Post subject:

I've been wanting to get one of those bars for years. Now that I'll be back in Mobile when I get home I'll have to go hit up the u-pull-it for one. I searched years ago in Pensacola u-pull-it for one.
_________________
~ PSE driver - James
'96 PSE-T

If it takes a chicken and a half a day and a half to lay an egg and a half, then how long does it take a grasshopper with a wooden leg to stomp a hole in a 2x4?